Pinpoint Gold And Silver Finder Underground Metal Detector Fs2+
In Stock
$126.00
- Product Code: TITRLI-268-903
Pinpoint Gold And Silver finder Underground Metal Detector FS2+
| Specification | |
| Model : |
FS2+ |
| Weight : | 2 lbs, 8 oz with battery installed |
| Standard search coil : | 5 inch (12.3 cm) closed-frame round biaxial, not waterproof |
| Batteries : | Single 9 volt rectangular alkaline |
| Operating principle : | VLF induction Balance |
| Operating frequency : | 19 kHz, crystal controlled |
| Reactive overload : | 10,000 micro-cgs (with standard search coil) |
| Resistive overload : | 1,200 micro-cgs (with standard search coil) |
| Ground balance range : | From ferrite to salt water inclusive |
| Discrimination ground suppression : | combination of 2nd and 3nd order methods |
| Target ID ground suppresion : | 3rd order |
| Battery life : | 15+ hours on good quality alkaline |
| Operating temp range : | 14-122 degrees'F (-10--+50'C) |
| Operating humidity range : | 0 - 90% noncondensing |
| Mechanical : | S-rod with electronic housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable positon arm rest |
| Introduction : |
|
FS2+ is unique among gold prospecting metal detectors for its combination of high sensitivity to small gold nuggets and its versatile function as an all-purpose treasure detector. The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separate control over signal gain and threshold, and a unique discrimination control system. These features also make for a great relic-hunting detector, especially when the FS2+ is outfitted with the optional 11” DD search coil. While the FS2+ makes for a highly competent coin-shooting detector, its user interface and features are not specifically designed for this purpose. As a coin-shooter, you will notice that the FS2+ exhibits slightly lower sensitivity to high conductivity coins, like a U.S. quarter; this is a result of its specialized design to emphasize sensitivity to small low conductivity metals like gold nuggets. FS2+ is outfitted with a small 5” search coil as standard equipment since this search coil construction is best-suited to finding gold nuggets. You may be familiar with other metal detectors which have larger search coils, generally in the range of 8 to 10 inches in diameter. Large coils are designed to cover the maximum amount of ground efficiently and for the deepest ground penetration. Small search coils, intended for gold prospecting, are designed for precision. Its small DD search coil makes pinpointing easier, fits into small spaces where gold is often hidden, is better suited to penetrate highly mineralized soils where gold is frequently found, and has the highest possible sensitivity to tiny gold nuggets. |
Shipping methods: Air plane, Sea, Express.
